Shenzhen King Visionled Optoelectronics Co.,LTD
Shenzhen King Visionled Professional makes good quality, provide perfect product and service for every customer.
Add to Cart
16:9 Golden 4K 8K Indoor Video Wall 500W/M2 1000nits Small LED Display Board P1.25
4K 8K P1.25 LED Video Wall Featrues:
| item | P1.25 4K 8K P1.25 LED Video Wall |
| Color | Full-color real pixels |
| Use environment | Indoor |
| Pixel pitch | 1.25mm |
| Module size | 200*150mm |
| Physical density | 640000 dots/㎡ |
| Pixel configuration | 1R1G1B |
| LED chip | SMD1010 |
| Module resolution | 160*120 |
| Module power | 20w |
| Recommended viewing distance | >1.2m |
| Best viewing angle | H: 160°; V:160° |
| Maximum power consumption | 700w |
| Cabinet size | W400m×H300mm |
| Standard cabinet resolution | 320*240 |
| Driving method | 1/30 Scan, Constant Current |
| Video frame rate | ≥60 Hz |
| Rate refresh | ≥3840Hz |
| White balance brightness | ≥700cd |
| Operating temperature/Humidity | -40℃~+60℃ |
| Ingress protection | IP43 |
| Input voltage | 110-220V AC±10% |
| Gray scale /Color | Display Colors ≥16.7M(Synchronize) |
| Brightness control | Manual/Automatic |
| Input signal | RF,S-VIDEO,RGBHV,YUV,YC & COMPOSITION,etc |
| Control system | PCTV+DVI video card+control card+fiber |
| MBTF | >5000 hours |
| Life Time | >100,000 Hours |
| The rate | <0.0001 |
After-sale service of 4K 8K P1.25 LED Video Wall
1.Do you provide onsite assistance?
Yes, our trained professional is available during your event to install, dismantle and support.
2: How is the switching sequence of LED display screen?
1) screen switching sequence: on, first turn on the computer, then screen; off, first shut off screen, then computer. 2) Interval of switching LED display must be greater than 1 minute.
3: How is the ambient temperature of LED display screen?
When ambient temperature is too high or cooling condition is bad, users had better not to turn on the screen for a long time. Screen shall be installed in temperature from-10°C to 40°C. Over environment temperature range, temperature control equipment must be installed. It is forbidden to install LED display near any heat source.